The Classeq Alto 130 dishwasher is an ultra compact machine, 1150mm long, capable of washing up to 130 racks per hour. Complete with double skin, auto timer and Type ‘A’ Air gap. The Alto 130 also incorporates self draining wash pump and radiused corners throughout to ensure optimum hygiene. Access to the interior of the machine is easily gained via a full width door. With power wash and rinse zone with optional dryer available.

  • Alto 130 Power wash zone and rinse zone
  • Alto 130D Power wash zone, rinse zone and hot air drying zone.
  • Alto 130CD Power wash zone, rinse zone and corner hot air drying zone.

Specifications

Width 1150 mm
Depth 770 mm
Height – Door open 2025
Length 1150mm
Height 1565 mm
Maximum plates per rack 18
Wash chamber height 400 mm
Operating level >64 dB
Weight – Net N/A
Built in air gap (water council approved – WRC) Yes
Rinse Booster Pump Yes
Built in detergent dispenser Optional
Built in rinse aid dispenser Optional
Double skinned cabinet Yes
Racks per hour 100/130
Cycle Times 100/130 racks per hour
Water connection 3/4
Water inlet height from floor level 226 mm
Required water pressure 1-3 bar
Required water flow (inlet solenoid valve capacity at 3 bar) 15 Ltrs/min
Maximum Drain Height from floor level 171 mm
Drain Size 1
Amps required – 3 Phase – Water fed @ 40°C 32 Amps
Amps required – 3 Phase – Water fed @ 10°C 40 Amps
Total connected load – Water fed @ 40°C 17.5 kW
Total connected load – Water fed @ 10°C 27 kW
Pre wash tank heating N/A
Wash tank heating 8 kW
Rinse boiler heating – Water fed @ 40°C 16 kW
Rinse boiler heating – Water fed @ 10°C 25.5 kW
Pre wash pump size N/A
Pre wash pump capacity N/A
Pre wash tank capacity N/A
Pre wash tank operating temperature N/A
Wash pump size 1.1 kW
Wash pump capacity 750 Ltrs/min
Wash tank capacity 70 Ltrs
Wash tank operating temperature 55°C
4 Eco stage rinse No
Rinse boiler operating temperature 85°C
Rinse water consumption 260 Ltrs/min
Rinse boiler capacity 17 Ltrs
Drying tunnel Optional
Corner drying tunnel Optional
Drying tunnel loading 6.4 kW
Drying tunnel length 600 mm
Drying tunnel circulation 1150 m/3/hr
Drying tunnel relative humidity 25%
Heat recovery unit Optional
Circulation 700 m/3/hr
Reduction in electrical loading 5 kW
Steam condenser unit Optional
Cold water consumption 270 Ltrs/hr
Exraction spigot Optional
Diameter 250 mm
Integral extraction fan Optional
Autotimer Standard




MRP £12,820.00

Our Prices for the 130 rack start from £9,486.80 + VAT

INSTALLATION

Elite offer a comprehensive installation package on all Classeq products. Please call us on 01923 236 238 for more details.

 

WARRANTY INFORMATION

Elite offer a comprehensive installation package on all Classeq products. Please call us on 01923 236 238 for more details. Terms and Conditions apply.

 

DELIVERY

The Alto is manufactured to customers requirements. Delivery cost will be determined on survey.