Classeq Hydro 750 vs Classeq Duo 750

Classeq Hydro 750 vs Classeq Duo 750 Review

In this comparison review of the Classeq Hydro 750 vs Classeq Duo 750. We shall discuss the differences of these two commercial dishwashers in detail, and hopefully helping make a decision which machine is right for it’s establishment.

In the sections below i’ll guide you through 3 sections, helping determine which integral components or type of commercial dishwasher you require.

Sections

1: The differences between the two Classeq dishwashers.

2: How to determine which integral components are essentially required.

3. Conclusion.

 

Classeq Hydro 750

Classeq Hydro 750 vs Classeq Duo 750

Classeq Duo 750

Classeq Hydro 750 vs Classeq Duo 750

ORDER NOW CLICK HERE

FOR OUR PRICE LIST OF CLASSEQ FULL RANGE PLEASE CLICK HERE

 

Section 1:

These Classeq dishwashers are equipped with a 500mm rack/basket size. They both share the same power configurations of either, 230V/AC 2.98KW, 6.84KW single Phase or 415V/AC 6.84KW 3 Phase. The 2.98KW version is accomplished by removing links from the wiring lomb therefore bypasses two of the three elements in the rinse boiler making them redundant. The power configuration is selected when ordering from Classeq but can always be changed by one of our engineers on request.

The difference between the  Classeq Hydro 750 and Classeq Duo 750 commercial dishwashers.

Firstly these two Classeq front loading dishwashers are built from the same 500mm basket size design. The difference being the Duo cabinet is double skinned and the Hydro’s is single skinned. A double skinned cabinet helps to reduce noise and heat lose.

The Classeq Duo 750 comes all singing all dancing. Including a drain pump, rinse booster pump, chemical pumps and a WRAS approved Type A air gap. Also giving an option of ordering with an integral water softener for an extra cost.

The Classeq Hyrdo 750 is simply a basic version of the Duo, using the same major essential components. Such as the wash pump, heating elements and chemical pumps.

Classeq provide an option ordering the Classeq hydro 750, with a Drain pump if required. Classeq also give the option to fit the Hydro with a rinse booster pump which includes a WRAS approved Type A air gap. That having said the rinse booster pump comes at a price. And at this point in my opinion you’re better off ordering the Duo 750, as you will get more bang for your buck.

The Classeq Hydro 750 dozen’t have the option for an integral water softener. So if you’re in an area where one is required, then its essential to account for room for an external water softener.

Key Points

Classeq Hydro 750
Width 550 mm
Depth 625 mm
Depth – Door open 985 mm
Height 825-845 mm
Rack size Square 500 mm
Maximum plates per rack 18
Door opening height 360 mm
Maximum component height 345 mm
Operating level 70db 
Weight – Net/Gross 60/65 kg
Rinse booster pump Optional
Built in detergent dispenser Yes
Built in rinse aid dispenser Yes
Double skinned door Yes
Double skinned cabinet No
Maximum racks per hour – water @ 50°C 20
Cycle Times 3 min
Water connection – BSP 3/4
Water inlet height from floor level 40 mm
Required water pressure 2 bar
Required water flow 8 Ltrs/min
Drain type Optional
Drain size 22 mm
Operating voltage 230V/50Hz/1 – Yes 400V/50Hz/3 – optional
Amps required – 1 Phase – Water fed @ 40°C 30 Amps
Amps required – 1 Phase – Water fed @ 10°C 30 Amps
Total connected load – Water fed @ 40°C 6.84 kW
Total connected load – Water fed @ 10°C 6.84 kW
Temperature interlock Yes (can be removed)
Quick start mode Yes
Wash tank heating 2.0 kW
Rinse boiler heating – Water fed @ 40°C 6.0 kW
Rinse boiler heating – Water fed @ 10°C 6.0 kW
Wash pump size 0.74 kW
Wash pump capacity 380 Ltrs/min
Wash tank capacity 19 Ltrs
Wash tank operating temperature 55°C
Rinse boiler capacity 7 Ltrs
Rinse boiler operating temperature 85°C
Rinse water consumption @ 2 bar 3.25 Ltrs
Max/Min stand pipe height from floor 600mm/0mm
Max/Min water pressure 6 bar / 1 bar
Minimum water flow 8 Ltrs
Classeq Duo 750
Width 570 mm
Depth 625 mm
Depth – Door open 985 mm
Height 825-845 mm
Rack size Square 500 mm
Maximum plates per rack 18
Door opening height 360 mm
Maximum component height 345 mm
Operating level 70db 
Weight – Net/Gross 60/65 kg
Rinse booster pump yes
Built in detergent dispenser Yes
Built in rinse aid dispenser Yes
Double skinned door Yes
Double skinned cabinet yes
Maximum racks per hour – water @ 50°C 20
Cycle Times 3 min
Water connection – BSP 3/4
Water inlet height from floor level 40 mm
Required water pressure 2 bar
Required water flow 8 Ltrs/min
Drain type Pumped
Drain size 22 mm
Operating voltage 230V/50Hz/1 – Yes 400V/50Hz/3 – optional
Amps required – 1 Phase – Water fed @ 40°C 30 Amps
Amps required – 1 Phase – Water fed @ 10°C 30 Amps
Total connected load – Water fed @ 40°C 6.84 kW
Total connected load – Water fed @ 10°C 6.84 kW
Temperature interlock Yes (can be removed)
Quick start mode Yes
Wash tank heating 2.0 kW
Rinse boiler heating – Water fed @ 40°C 6.0 kW
Rinse boiler heating – Water fed @ 10°C 6.0 kW
Wash pump size 0.74 kW
Wash pump capacity 380 Ltrs/min
Wash tank capacity 19 Ltrs
Wash tank operating temperature 55°C
Rinse boiler capacity 7 Ltrs
Rinse boiler operating temperature 85°C
Rinse water consumption @ 2 bar 3.25 Ltrs
Max/Min stand pipe height from floor 600mm/0mm
Max/Min water pressure 6 bar / 0.5 bar
Minimum water flow 8 Ltrs

Section 2:

This section will help determine the essential components required, for a correctly operating dishwasher.

Do you need a drain pump?

A drain pump is required if the Drain services, is higher than the required hight.

For a gravity drain to work properly on these Classeq dishwashers. The connection for the waste must not exceed the maximum hight of, 40mm higher than the base which the dishwasher stands on. As shown in the drawing below.

drainp1

A Drain Pump is essential if the waste connection exceeds the maximum hight, for a gravity drain to work correctly.

Do you need a Rinse Pump?

Classeq dishwasher’s, without a integral rinse booster pump, require a minimum of 2 bar mains water pressure.

Insufficient water pressure, will not provide enough force to propel the Rinse arms to spin inside the dishwasher. Resulting in a ineffective rinse.

In addition dishwashers with a integral Rinse booster pump, require a minimum of 0.5 bar of mains water pressure.

Testing Mains Water Pressure

Using a pressure gauge to test the mains water supply is always advised when wanting your dishwasher to produce the very best results.

The pressure gauge is connected to the Washing Machine Valve (water supply), at the point where the dishwasher will be connected to. To imitate the effecters of busy service periods, i would recommend opening as many taps in the restaurant, bar, kitchen etc and letting them run whilst a reading is being taken. This is because a reduction in pressure will accure when multiple taps are in use, and if the pressure drops below 2 bar then it is not enough pressure.

A Rinse Pump is essential with mains water pressure lower than 2 bar.

Do You Need a Water Softener?

 

Water contains dissolved mineral compounds and much of the tap water in our region is hard in character. The level of water hardness is dependent on the type of rocks or rivers from which it is collected. When a dishwasher boils hard water it can form fur or scale, inside the machine and on the dishes etc. Also prevent chemicals from doing there job properly. The scale itself is calcium carbonate (chalk) which has come from the water. It can be removed by an iron exchange with sodium, potassium through a water softener.

The UK map below indicates the concentrate of minerals in water supplies. If you’re in areas highlighted in blue a softener is essential.

 

Water hardness map

The best way to apprehend if you need a water softener is to either, consult your water board or undertake a water hardness test.

These strips are dipped into your mains waster supply for 3 seconds, then matched against a colour chart. This will indicate the hardness of your water supply.

If you’re located in a hard water area it is good practice to test the water exiting your softener regally. This will insure that your softener is regenerating properly. Indicating weather its running effectively and not left for long periods, in-between regeneration cycles acting redundant. e.g If the regeneration cycle is set for a Monday, test Friday and so on, every so often.

The reason being you may be consuming more water volume through the softener than you’re aware. And you may have to regenerate the softener more regally to compensate.

The Classeq Duo 750WS with integral softener automatically regenerates, and has a light indicating when it is due for salt refilling.

 

Section 3:

Conclusion

So the Classeq Hydro 750 vs Duo 750 so which one will it be?

Most of all this solely depends on what you need for the dishwasher to perform correctly.

Firstly if you’re on a budget then i would recommend the model Hydro 750 as long as your site provides these key factors:

  • Water pressure of a minimum of 2 bar.
  • Waste pipe is the correct hight for gravity drainage.
  • If a water softener is required, and room for an external softener is accounted for.

If the above is correct but a drain pump is required i would recommend the model Hydro 750DP.

In addition and the above is insufficient you will require all the other functions or would just like the better machine. I would recommend the Duo 750. Providing room for an external softener if needed is accounted for.

Finally if you require an integral softener which will save space i would recommend the Duo 750WS.

 

ORDER NOW CLICK HERE

 

 

Classeq Hydro 857 Special Offer Start’s From £1,960

Classeq Hydro 857 Glasswasher special offer starts from only £1,960 Ex Vat
Please call for details contact 01923 236 238

The Classeq Hydro 857 Pass Through Dishwasher is easy cleaning due to the continuous hood clean and the removable front panel allows simple service access. Includes Drain pump and optional rinse pump, detergent pumps and WRAS approved Air gap.

 

 

Classeq Hydro 857

Hydro 857

 

 

 

 

features

Product TypePass Through Dishwashers.


Range HYDRO.


Model Number H857.


Order code: H857/ H857DET/ H857A/ H857A DET/ H857A DET WS.


Dimensions 630mm(W) x720mm(D) x1520mm(H).


Rack Size 500 x 500mm.


Electrical loading 6.84kw.


Cycle time 1 1/2 or 3 min.


Drain Pump Standard.

 

For Specification Click here

 

Our Price

ModelDetergent PumpDrain TypeRinse TypeIntegral Water SoftenerPower RatingSales Price Ex Vat
HYDRO 857A/DETYesPumpedBoostedNoSingle Phase/3Phase
6.84KW
£2,379.99
HYDRO 857A/WS/DET
YesPumpedBoostedYesSingle Phase/3Phase
6.84KW
£2,759.99

ORDER NOW CLICK HERE

FOR OUR PRICE LIST OF CLASSES FULL RANGE PLEASE CLICK HERE

 

 

ancilarys tabling and accessories

 

We also can supply ancillary tabling and accessories to fit your pass through dishwasher.

A range of stainless steel tabling and accessories to compliment all Classeq pass through and conveyor ware washers.

Fabricated from 304 type food grade stainless steel, all tabling can be manufactured to individual requirements to accommodate special needs such as pipe work, pilers etc.

For special fabrication requirements a site survey is strongly recommended.

 Hydro 857

Left hand or right hand entry or exit tables in

Sizes:

  • (L)600mm (W)650mm
  • (L)700mm (W)650mm
  • (L)800mm (W)650mm
  • (L)1100mm (W)650mm
  • (L)1500mm (W)650mm

Left hand or right hand sinks fitted with:

  • 500mm x 400mm sink
  • Single feed overhead prewash spray and mixer taps
  • Full length 400mm high splash back
  • (L)1100mm (W)800mm
  • (L)1500mm (W)800mm

 Elite Technical Services Ltd. Prices

INSTALLATION

Elite offer a comprehensive installation and site survey package on all Classeq products. Please call us on 01923 236 238 for more details.

 

more hydro pass though dishwashers

 

 

Classeq Duo 750 Commercial Dishwasher

Classeq Duo 750 Commercial  dishwasher starts from only £1,480 Ex Vat

Special offer on Installation Prices starts from £100 Ex Vat

Please call for details contact 01923 236 238

The Classeq Duo 750 commercial  dishwasher with removable rack and wash chamber door to allow for easy cleaning and simple service access. Complete with Drain pump, rinse pump and WRAS approved Air gap for simple and compliant installation.  There is an option to include an integral water softener, please see the price list below for the difference.

 

Classeq Duo 750 Commercial Dishwasher

Classeq Duo 750 Commercial Dishwasher

 

 

 

features

Product Type Front Loading Dishwashers.


Range DUO.


Model Number DUO 750


Order code DUO 750.


Dimensions 570(W) x 625(D) x 845(H)mm.


Rack Size 500 x 500mm.


Electrical loading 6.84kW – 32 amp (can be downrated to 13 amp).


Cycle time 3 minutes.


Chemical Dispensers Yes – Both rinse & detergent.

 

For Further Details Please Click Here

Our Price

ModelDrain TypeRinse TypeIntegral Water SoftenerPower RatingSales Price Ex Vat
D500 DUOPumpedBoostedNoSingle Phase 13Amps 2.92KW/ Single Phase 32Amps 6.84KW/
3 Phase 13Amps 6.84KW
£1,799.99
D500 DUO WSPumpedBoostedYesSingle Phase 13Amps 2.92KW/ Single Phase 32Amps 6.84KW/
3 Phase 13Amps 6.84KW
£2,139.99

ORDER NOW CLICK HERE

FOR OUR PRICE LIST OF CLASSES FULL RANGE PLEASE CLICK HERE

 

You May Also Like:

Accessories

INSTALLATION

Elite offer a comprehensive installation and site survey package on all Classeq products. Please call us on 01923 236 238 for more details.

WARRANTY INFORMATION

All Classeq Duo models come with a 2 year parts and labour warranty as standard. Please call us on 01923 236 238 for more details. Terms and Conditions apply.

FREE DELIVERY

Free delivery in England and Wales included. All orders have a normal delivery time of 1 – 5 working days.

Blender Repairs and Servicing

Service and Repairs for the Blender Market

According to a report by Global Industry Analysts Inc, the global smoothie market was estimated to reach $9.0 billion by 2015, and is currently one of the major segments of the soft drink market in both the UK and US.

While the United States still dominates the world smoothie market, Europe is fast catching up, thanks to rise in the popularity of home blending machines such as the NutriBullet, and, believe it or not, warmer (if somewhat wetter) weather.blender repairs and servicing

Itʼs no wonder then that companies such as Starbucks and Costa have invested heavily in their Frappuccino® and smoothie machines. Starbucks alone have over 36,000 different ways to customize their favourite beverage, and Costaʼs SuperDay Smoothies range provides 2 of the recommended 5 a day pieces of fruit for the health conscious, so you need to be confident that your machine wonʼt let you down.

Blendtec blenders are built to the highest commercial standards, making them the most advanced blender you can buy, which is why it is favoured in commercial establishments such as Starbucks and Costa. However, with these blenders being used day in and day out, you need to make sure that they are serviced regularly, and by people who understand how they work.

Watford based Elite Technical Services was founded in 1999, and as well as installing and maintaining filtered water systems throughout Britain, they are also accredited service agents for Blendtec for the UK and Ireland.

blendtec blender service and repairElite Technical Services strive to collect, repair and return all blender repairs within four working days, and for regular customers, they can arrange to keep a pool of units. These can then be used as replacements in exchange for the faulty blender on site, all within a ʻnext working dayʼ timescale. All blender warranty repairs are backed by Blendtec within the specific timescale of the type of model. Work completed outside of the initial warranty period, will have a new 12 month guarantee, so you know you are good hands.

We canʼt see the smoothie or Frappuccino® craze ending any time soon, and with summer fast approaching, you need to make sure you are prepared. Make sure you have Elite Technical Services on hand so you never have to worry about turning customers away due to faulty equipment.

 

 

Information taken from:

http://www.prweb.com/releases/smoothies_market/frozen_mix_smoothie/ prweb3808804.htm

https://news.starbucks.com/uploads/documents/Frappuccino_Fact_Sheet_FINAL.pdf

http://www.costa.co.uk/press/#/pressreleases/costa-to-trial-superday-smoothies-inselected-areas-1197079

Eau de vie Table Top Unit

Stylish, simple to use and compact.

EAU de VIE’s stylish Table Top Unit is the perfect option for replacing or complementing pre-bottled water in restaurants, bars, small hotels, care homes, offices, conferencing facilities and public sector establishments.

It’s modern, elegant and compact design means the TT is ideal sited either in full view, front-of-house or back-of-house, sitting comfortably on a bar or table top — as the name suggests.

The TT has a high performance ice-bank refrigerator capable of delivering large volumes of water at consistently low temperatures.

image