The Classeq Alto 100 dishwasher is an ultra compact machine, 1150mm long, capable of washing up to 100 racks per hour. Complete with double skin, auto timer and Type ‘A’ Air gap. The Alto 100 also incorporates self draining wash pump and radiused corners throughout to ensure optimum hygiene. Access to the interior of the machine is easily gained via a full width door. Model with drier also available.

Width N/A
Depth 770 mm
Height – Door open 2025 mm
Length 1150 mm
Height 1565 mm
Maximum plates per rack 18
Wash chamber height 400 mm
Operating level 64 dB
Weight – Net N/A
Built in air gap (water council approved – WRC) Yes
Rinse Booster Pump Yes
Built in detergent dispenser Optional
Built in rinse aid dispenser Optional
Double skinned cabinet Yes
Racks per hour 100
Cycle Times 100 Racks per hour
Water connection 3/4
Water inlet height from floor level 226 mm
Required water pressure 1-3 Bar
Required water flow (inlet solenoid valve capacity at 3 bar) 15 Ltrs/min
Maximum Drain Height from floor level 171 mm
Drain Size 1
Drain Pump Y/N/ Optional No
Amps required – 3 Phase – Water fed @ 40°C 25 Amps
Amps required – 3 Phase – Water fed @ 10°C 40 Amps
Total connected load – Water fed @ 40°C 15.5 kW
Total connected load – Water fed @ 10°C 25 kW
Pre wash tank heating N/A
Wash tank heating 8 kW
Rinse boiler heating – Water fed @ 40°C 14 kW
Rinse boiler heating – Water fed @ 10°C 23.5 kW
Pre wash pump size N/A
Pre wash pump capacity N/A
Pre wash tank capacity N/A
Pre wash tank operating temperature N/A
Wash pump size 1.1 kW
Wash pump capacity 750 Ltrs/min
Wash tank capacity 70 Ltrs
Wash tank operating temperature 55°C
4 Eco stage rinse No
Rinse boiler operating temperature 85°C
Rinse water consumption 240 Ltrs/Hr
Rinse boiler capacity 17 Ltrs
Drying tunnel Optional
Corner drying tunnel Optional
Drying tunnel loading 6.4 kW
Drying tunnel length 600 mm
Drying tunnel circulation 1150 m/3/hr
Drying tunnel relative humidity 25%
Heat recovery unit Optional
Circulation 700 m/3/hr
Reduction in electrical loading 5 kW
Steam condenser unit Optional
Cold water consumption 240 Ltrs/Hr
Exraction spigot Optional
Diameter 250 mm
Integral extraction fan Optional
Autotimer Yes

MRP £11,380.00

Our price for the 100 rack per hr range start from £8,421.00 + VAT

Elite offer a comprehensive installation and survey package on all Classeq products. Please call us on 01923 236 238 for more details.



Warranty one year. Additional warranty to be discussed as part of order. Please call us on 01923 236 238 for more details. Terms and Conditions apply.



The Alto is manufactured to the customers requirments. Delivery cost will be determined on survey.